mardi 23 février 2016

Day 6

Now that the neck is roughly cut with the band saw, we can draw the heel shape, the ribs slots and the head shape from some templates. The head shape is drawn in the front and the back.






 We start to plane the edges of the head.


We then carve the top of the head with a chisel from both sides, leaving a high spot in the midle we will remove at the end to make a flat surface.



The ribs slots are then cut and clean with a thin chisel. The slots are parallel with a slight angle.




The heel is carved then, we start by sawing each side. We finish with gauges and chisels, trying to reproduce the Manuel Ramirez heel shape.






Aucun commentaire:

Enregistrer un commentaire